Jump to content

PPF ON ALUMINUM

By tintwiz
March 21, 2016 in Window Tinting - General Discussion

Recommended Posts

tintwiz

Posted March 21, 2016

- Report

Posted March 21, 2016

dont have much experience with ppf material but a big job came up with putting ppf on a portion of gas tankers, wondering if any of you have any experience applying it to raw aluminum ? could there be any issues with the aluminum oxidizing underneath from adhesive ? 200 tankers each with a 4' x 4' piece by filler neck .

Vinylspec

Posted March 21, 2016

- Report

Posted March 21, 2016

I would try a test piece to see if it will work.

WearTheFoxHat

Posted March 21, 2016

- Report

Posted March 21, 2016

you can probably do a dry install for something that small.

Never mind I read inches not feetches

TINTZEUS

Posted March 22, 2016

- Report

Posted March 22, 2016

No. You will be ok. Protect the aluminum

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

Sponsored by
Activity Stream
1. 52
  Mk 5 golf rear window
  
  I'm sure a call to the parts dept of your local VW dealership will confirm availability. There are also plenty of aftermarket auto glass manufacturers in the world. If I can locate just about any piece of car glass here in Australia, I'm sure it won't be too hard wherever you are. There's always used available too.
  
  1
  
  Tuesday at 11:33 PM in Volkswagen
2. 52
  
  Mk 5 golf rear window
  
  Going to replace all the rubber seals doors, trunk, etc. and need to source a rear window in case we break this one. A just because thing. They make a new windshield that we can get but not a rear window Any help??? Sarge
  
  Tuesday at 02:57 PM in Volkswagen
3. 3
  
  How to get an entry level tint job ?
  
  Did you get the job or what?
  
  Monday at 11:46 PM in Window Tinting - General Discussion
4. 68
  
  llumar pinnacle...second installer visit upcoming!? bubbling/dust month later
  
  💩 💩 🤣🤣🤣🤣 https://www.instagram.com/reel/C8A1Cm0R_dS/?igsh=a3ZwbWIzOXRqMndh
  
  Monday at 09:07 PM in Window Tinting - General Discussion
5. 0
  
  Jaguar lv problem with the sizing media with lever up to abort?
  
  Hello guys have anyone has any problems with this topic? I have this machine for 14 years and I bought used but she been a great horse and the time came! She broke down! Just bought a new one but I will receive in 30 days I like to fix this one till I got the new one! Any one here know where I can find a place that work on this plotter?
  
  Monday at 06:07 PM in Plotters and Cutting Systems
6. 68
  llumar pinnacle...second installer visit upcoming!? bubbling/dust month later
  
  Why didn't you do it right the first time?
  
  2
  
  Sunday at 09:05 PM in Window Tinting - General Discussion
7. 68
  
  llumar pinnacle...second installer visit upcoming!? bubbling/dust month later
  
  I can redo it for you. You'll love it! Perfect in every way.
  
  November 28 in Window Tinting - General Discussion
8. 3
  How to get an entry level tint job ?
  
  Riverside, CA. I just went and asked if they were interested.
  
  1
  
  November 28 in Window Tinting - General Discussion
9. 3
  
  How to get an entry level tint job ?
  
  Go to the best shop in town and hang out. Bring everything you have. Ask for a job. Where are you?
  
  November 27 in Window Tinting - General Discussion
10. 3
  
  How to get an entry level tint job ?
  
  Hello, im looking for help on to get into the tint industry. I have contacted many shops around me (IE, CA) but don’t seem to be interested. I have a year and half experience with wraps and done a tint course, gaining some experience but knowing how to work plotter, heat shrink etc. What would be the best possible way ?
  
  November 27 in Window Tinting - General Discussion

×

×

Create New...