Jump to content

Looking for a Youtube video

Anon o Mouse

Recommended Posts

Anon o Mouse

Anon o Mouse

Posted
Posted

Hi,

you guys have been helpful in the past so thought I would try my luck again.

I saw a video on youtube where a shop was demonstrating 3m crystalline and a cheaper film to a customer. It showed the two films mounted next to each other on a wall cutting board and the shop does a rubbing test and then puts a strong tape across both films. The tape is then quickly removed which pulls off the cheaper dyed films color but leaves the 3m crystalline intact.

I have spent ages looking for this video again, but cant see it. If anyone can help I would be really grateful.

cheers

steve

Link to comment
Share on other sites
Anon o Mouse

Anon o Mouse

Posted
  • Author
Posted

Yes I suppose I could, but given my location it is bloody hard to do that here, as they won't supply small amounts here. Also I wanted to show someone in country where they don't speak English, but can understand a video clip. Hence the question about a video.

But thanks for your insight anyway.

Link to comment
Share on other sites
Guest VaTinterPMan

Guest VaTinterPMan

Posted
Posted

Do they even sample the crystalline?? It really does seem like a good film especially the 90% and 70% for w/s and my older customers that want it really like....I swear I was doing more and more of 60% and 50% all the way around this pass summer...

Link to comment
Share on other sites
Guest mosolarpro

Guest mosolarpro

Posted
Posted

We just made this video to show the heat box demo of Crystaline, try something like this too. It really does knock the heat down people use there hands to see the difference too.

Link to comment
Share on other sites
Tintguy1980

Tintguy1980

Posted
Posted

Hi,

you guys have been helpful in the past so thought I would try my luck again.

I saw a video on youtube where a shop was demonstrating 3m crystalline and a cheaper film to a customer. It showed the two films mounted next to each other on a wall cutting board and the shop does a rubbing test and then puts a strong tape across both films. The tape is then quickly removed which pulls off the cheaper dyed films color but leaves the 3m crystalline intact.

I have spent ages looking for this video again, but cant see it. If anyone can help I would be really grateful.

cheers

steve

Honestly, I thought it was the other way around. Dyed film stayed intact.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    Lexen

    martinmetalwork.com

    rxactlite.com

    rewiredtech.io

    tintwiz

    tinttek

    auto-precut.com

    filmvinyldesigns

    The Tint Tutor

    ride wrap

    signwarehouse

  • Activity Stream

    1. 1

      Gull wing system install

      Both can be challenging; Gullwing already has the adhesive with a liner that needs to be removed and pressure applied to seat the adhesive with as few air pockets as possible. Any hiccups means a do over with each strip. Think about how it would look from the outside, not to mention the task of keeping it evenly aligned as you move along each strip. Practice makes progress, not perfection. I've got a few feet of white left over from my days in the industry and I can assure anyone will be challenged to install the stuff. What I have is predecessor of Gullwing and I cannot remember what they called it back then. ~~~~~~~~~~~~~~~~~~~ Dow995 structural sealant is akin to working with peanut butter; it can be messy, but once dry it has a much cleaner look to a Gullwing with air pockets trapped. Sealant can easily drip or contact unwanted surfaces, making clean up fun. ~~~~~~~~~~~~~~~~~~~ Either way, if there's any need for removal after a lengthy period of time, it could be work intensive to not do damage to the frame. Also, for both, you are best of waiting no less than one week film dry time (sun exposure and or warm and dry weather conditions) before applying any anchoring system, lest you find yourself with film lift in areas where the anchoring system was under stress to pull away. Here's a link for anyone who wants more info on Gullwing installation. https://windowfilm-staging.azurewebsites.net/commercial/bomb-blast-protection/mdico-gullwing-anchoring-system
      Tintguy1980 in Window Tinting - General Discussion
    2. 1

      Gull wing system install

      How does the Gull wing system compare to the taping off and using the sausage packs for safety film. ?
      MobileTintGuy in Window Tinting - General Discussion
    3. 0

      High Technology Window Films Inc

      Flat Glass Residential and Commercial Installer wanted asap. Full time position is in Tampa Florida 33602 Residential and Commercial only (No Auto) Pay is $900.00 per week plus monthly bonus and work week is any 5 days out of 7 because workdays can change based on the customer's needs. Must be very reliable and professional with great attitude. 2 year experience minimum. Michael Vega Owner 727-486-2796 www.hightechnologywindowfilms.com
      High Tecnology Window Film in Classifieds • Employment • Marketplace
    4. 4,196

      What did you tint today?

      We (us tinters) make sexy,,, sexier!!
      Bham in Window Tinting - General Discussion
    5. 4,196

      What did you tint today?

      Hard to read minds you know. And the whole color change patterns are overkill. I’m off a mm and the whole kit is wrong. I need the easy kits for the car dealers doing the easy shit around me. Not I cover where paint isn’t. And there’s no heads up in the software ahead of time.
      no ma'am in Window Tinting - General Discussion
    6. 4,196

      What did you tint today?

      Dap. The patterns were ok. I usually bulk everything. None of the plots fit great until you figure out what the designer was thinking as far as proper streach goes. It may have went a little faster but coverage wasn't the same. This was number four, I bulked the other three and will probably bulk the next one.
      Dano in Window Tinting - General Discussion
    7. 4,196

      What did you tint today?

      Whose software? I’ve done a couple with core on the easier the z06 and struggled with wrap around on the outside grilles.
      no ma'am in Window Tinting - General Discussion
    8. 4,196

      What did you tint today?

      Nice! Sent you a DM.
      Flyer in Window Tinting - General Discussion
    9. 11

      Automotive Tint Comparison

      2024 Toyota RAV4 GX Auto 2WD
      MVOZ in Window Tinting - General Discussion
    10. 2

      Question, factory tinted windows and damage to eyes ????

      Automotive glass has evolved in the past couple of decades. It is spotty throughout the auto industry as to non-laminated glass that screens UV. Personally, I spent days going around car lots about 12-14 years ago using an EDTM 2450 meter to measure solar rejection performance, including UV. New models' privacy glass did have the capacity to screen a substantial amount of UV rays. Hell, even the front door glass (non-privacy) of a Cadillac screened a substantial amount of UV. It truly surprised me, so I went back to my desk and began searching through glass makers' performance values (what they would share that is). There were statements of UV protection and other (general) statements said, their glass protects the car interior. I'm sure a member of this site might have that meter, whereby they could do the same on car lots, after receiving permission from the dealer's manager. It is always better to be safe rather than sorry by having window film applied knowing all major brands screen 99%+ of the sun's UV rays.
      Tintguy1980 in Window Tinting - General Discussion
×
×
  • Create New...