Llumar or Suntek for front doors and windshield?

[Guest CZtint]

Hey guys'n'gals

I'd like to know some opinions on films you would use for front doors. Players in this game are Suntek CXP 80 and Llumar air 75 and Llumar air blue 80.

I'd like to stock some good rejective film I could offer for windshields and front doors.

If you can suggest any other, feel free to tell.

Cheers in advance

CZ

[coast2coasttinting]

If you are ok with their buy in then LULU is your best bet.

[Guest CZtint]

going to call them tommorow, also going to check EWF for their ceramic line

[coast2coasttinting]

EWF's ceramic line is much less expensive the both CXP and Air Blue films.

[FBO]

EWF's ceramic line is much less expensive the both CXP and Air Blue films.

That's what I use EWF Ceramic 70, and planing on adding 35 and 20 also as an upsell.

[The ///Man]

For windshield use the air 80 is nicer to look through than the cxp.

[Jake]

Is the EWF ceramic a titanium nitrate film? If so not sure it will work to match privacy glass on fronts. I use ASWF legend (ceramic) and can't match fronts with it. That's one thing I liked about cxp. But was never really sold on the performance of it.