-
Sponsored by
.png)
-
Activity Stream
-
9
after tint was already installed, how would I know if the installer actually xpel XR Plus, instead of just regular XR?
your idea sound great! however, I just thought of a non-destructive way to go about it. I can just go ask the tint shop to give me a small piece of regular XR tint in the same darkness. I can probably say something like I'll take that piece and apply it to my friend who has the same car as me, but her windows are totally not tinted. I'll just have to find a BTU meter and test her car and my car. -
2
steamer turned rubber glass seals white after removing tint.
an old 2003 lexus. my 07 lexus did the same thing. seal turned white after steamer got close i'll post a pic later of the white discoloration Google says it might be "rubber bloom" -
9
after tint was already installed, how would I know if the installer actually xpel XR Plus, instead of just regular XR?
If your willing to remove the tint from 1 window and use a heat lamp bulb and a BTU meter you could probably get a really good idea 😅 (from my experience) regular XR should get you about a 70% reduction in BTUs, where as XRPlus would be over 90%. You might at that point burn your bridge with your tinter though, it’s a bit extreme. -
2
Heavy Ghosting - Geoshield "Geo" Line
@Ryker Appreciate the tip, Thank You. Tinting was never easy, for sure. Not to go off on a tangent, but I can't imagine how much of a b*~ it would be to shrink Crystalline or Huper Optik, not to mention how expensive the film is. You'd need specialized factory training to learn em' I suppose. >:) Question if I may, is an H-Pattern absolutely necessary? Does it depend on your style of shrinking? I've noticed some folks play with the placement of the "H" , higher or lower, some don't tack the sides and leave just a central line to divide the top/bottom, and also some even somehow let the film float entirely with a tack. (dry shrinking btw) I've had a hell of a time previously on an early model Forester rear glass, and those apparently aren't even hard to shrink. 🤡 -
0
Bumper2Bumper Motorsports Looking for Lead Tint Installer (Thousand Oaks/Westlake Village)
About Us: Bumper2Bumper is an automotive restyling shop that focuses on cosmetic modifications, protection and maintenance. Window tinting, paint protection film, ceramic coatings and vinyl wrap are the primary focus for the shop. We are known to provide the highest of quality and workmanship our clients. We also strive to have a laid back environment where the employees enjoy coming to work every day and the clients are invited to come and hang out and check out the fun projects we have going on. Mission Statement : Constantly changing and evolving in the pursuit of excellence! Contact Us via eMail:Info@bumper2bumper.com or on Instagram @Bumper2Bumperauto Responsibilities: Installation of automotive window tint Removal of old tint and cleaning vehicles windows Keeping work area tidy between jobs Qualifications: MINIMUM OF 3 YEARS TINT INSTALLATION EXPERIENCE IS REQUIRED FOR THIS POSITION ABILITY TO INSTALL TINT WITH MINIMAL IMPERFECTIONS KNOWLEDGE ON USING A PLOTTER IS WELCOME BUT NOT REQUIRED Job Type: Full-time Pay: $20.00 - $40.00 per hour Expected hours: 40 per week Benefits: 401(k) Health insurance Paid time off Schedule: 8 hour shift Supplemental pay types: Bonus opportunities Commission pay Tips Ability to Relocate: Thousand Oaks, CA 91362: Relocate before starting work (Required) Work Location: In person -
-
0
ISO: Repair Techs for the Jaguar IV Cutting Plotter
Hi All, Just wondering is anyone knows of either a repair tech or a shops that can assist with trouble shooting, maintaining, and repairing a Jaguar IV Cutting Plotter. I am located in South Beloit, IL. I am about 30 minutes north of Rockford, IL; an hour and a half northwest of Chicago, IL, an hour south east of Madison, WI, an hour and 15 minutes south west of Milwaukee, WI. Any information would be greatly appreciated. Have a great weekend! -
9
after tint was already installed, how would I know if the installer actually xpel XR Plus, instead of just regular XR?
my tint installer is the same way.... so I ended up contacting xpel... apparently my tint installer is the top installer in my part of the state, according to the xpel rep... they(xpel) said all they needed for warranty was "his word"... -
-
2
steamer turned rubber glass seals white after removing tint.
not sure what the door glass seals are made of, but after steam removing tint, the seals turned white. possible to restore the black color? Car is old. Maybe I should have masked the seals with foil or used silicone lubricant on them before steaming so close?
-
Recommended Posts
Archived
This topic is now archived and is closed to further replies.