Flat Glass Installers

June 24, 2010

It is good to be cautious when confronted with something new, but it is silly to dismiss something because you simply don't believe it.

Let me be VERY CLEAR about how this works in case you think you are going to get ripped off somehow, because if we were getting the money up front for the install, I could understand the "doubting Thomas syndrome" from a few, so here goes... as simple as I can make it...

1- Customer goes to our site to purchase US made films - they pay for the film in advance.

2- Film is shipped directly to the customer via UPS pre-paid. (shipping is free even if only 30 sq. ft)

3- Customer applies film to their own glass OR

Customer contacts us when film purchase made and wishes to have a pro installer do the installation.

4-WE inform them that our team will charge ONLY FOR INSTALLATION about 5.50 per square foot and MINIMUM 250.00 if it's a small amount.

5- They say "too much"... we say... "oh well. Have a nice day, good luck with your installation."

6- They say "o.k."... we say... " we will have an installer in the area give you a call to arrange the details, and by the way... this is his name and contact info"

7 - We pass on YOUR contact information and when they call (AND THEY DO) you are professional enough to treat the call as a High Grade Referral.

8 - We don't take a penny of your money, we don't have the customer pay us for installation. We only want a cut of the amount that most installers can't get for themselves. ....Honestly, how many installers out there are getting about $5.50 per square foot to hang 4 mil 2 ply film?

If you need a couple of references of guys who did at least 800 square feet at 5.50 per square foot for INSTALL ONLY, (No product) I can give them to you.

This is money that you would have never seen, these are jobs that you might have heard about when having a beer with a buddy.

"Hey man, I can't believe I made FOUR GRAND (730 square feet) for installing that stuff yesterday and all it cost me was a bit of soap and sweat."

Hopefully this clears up a couple of thoughts some of you might have.

If you are interested... email me

installteam@shattersafe.com

with all your contact information.