second best week of the year,

May 31, 2010

this was my very first 2010 Camaro,, not bad at all if I do say so myself. not only did I get to do the tint I smoked the tails as well.

funny thing is when I arrived at the resident I noticed the tag< it was not from my state, there for I did not have the right film / however the gentleman proceeded to assure me that whatever I put on his car was ok (as he showed me his badge) .. the good thing about all this is I did the light shade all the way around for him and he was very happy with it, I was thinking to myself [/i]"plz don't ask me to put 20% on the car" :beer

CarbonXp 35, oracal 8300 dark

did my 2nd Camaro the very next day, this was nothing but a cake wake, I just breezed through it

Hp Supreme 35% and 16%

Not finished yet,, lol this was a cool weekend to work during a holiday weekend

this was my very first Dodge Challenger ,,, :beer ,, this was a cake walk as well,, love it,

Hp Supreme 35% and 16%

just in time for the weekend Bronze 20

looking out the dining area windows

looking out the bedroom windows,,,

ready for the water, dang it wish I was going :beer

Hp Supreme 10

I absolutely pissed this woman off to no end , full strip and retint integra,,

she was upset because I was Not installing the same thing back on her car,, :moa ,,, I simply told here this is one of the many reasons I don't use that film,,, she went on about being told it was the best around, she just went off :spit , again I simply pointed out the fact of the matter ( I was called to redo her windows because Why? ) she continued :blah ,, I said with a smile :lock about not using the same film but your not going to be disappointed ,,, did the work and :spit her to come pick her car up ,, while I waited on her to get there my nerves where shot from the stress so I just ready to cut lose :please (it was 5 min til 6 pm so my day was over) she arrived and was a total different woman when she saw her car ,, :beer gone bad customer turned into a very happy customer.

the bad

the good

her car now has Hp Supreme 35% 16%

Ford Bronco II Hp Supreme 35% 16%, Chevy 1500, Hp TrueGrey 38% 18%

Nano Fusion on fenders

May 31, 2010

Well at least the mfg gets off clean on all but the first car, the Chevy truck, trailer home and Bronco. :ppdance

The rest may have no warranty because they're illegal (ur in Florida right?) and one's a boat.

I have a friend that tints in Florida and he has always used Ch 30 and CH 15 to tint cars. The 30 is not legal for fronts and any film below a 22-24 vlt is illegal behind the b-pillar. Like I told him, go ahead, but the warranty is on you. He says most tinters in Florida do it.

Mfg love it because they don't have to pay out when it fails. :lol2

Booms · May 31, 2010

The 30 is not legal for fronts and any film below a 22-24 vlt is illegal behind the b-pillar.....

Incorrect :lol2

28% fronts / 15% rear with a +/- 3% variance. Thus as low as 25% legal on fronts, and as low as 12% legal on rears. :ppdance

So, all of Darkness car's are metering legal. :boogie

May 31, 2010

The 30 is not legal for fronts and any film below a 22-24 vlt is illegal behind the b-pillar.....

Incorrect

28% fronts / 15% rear with a +/- 3% variance. Thus as low as 25% legal on fronts, and as low as 12% legal on rears.

So, all of Darkness car's are metering legal.

No tolerance according to IWFA law chart.

Not trying to rain on the posters parade, merely an observation. :boogie

May 31, 2010

Busy you have been Darkness, nice variety of work you did .I don’t like doing the same thing all the time. And I like how you are doing your roll down edges, looks like now you are getting it, Keep it up…………….. :lol2

Booms · May 31, 2010

No tolerance according to IWFA law chart.

I don't feel like digging out the Fl. Statute....The variance is there, believe Me. :lol2

May 31, 2010

I've been schooled! :lol2

316.2955 Window sunscreening material; compliance labeling; tolerances.--

(1) Each installer or seller of sunscreening material shall provide a pressure-sensitive, self-destructive, nonremovable, vinyl-type film label to the purchaser stating that the material complies with the provisions of ss. 316.2951-316.2954. Each such installer shall affix the required label to the inside left door jamb of the motor vehicle. In addition, the label shall state the trade name of the material and the installer's or seller's business name. Labeling is not required for factory glazing which complies with Federal Motor Vehicle Safety Standard No. 205.

(2) Every percentage measurement required by ss. 316.2951-316.2954 is subject to a tolerance of plus or minus 3 percent.

(3) The department shall adopt rules approving light transmittance measuring devices for use in making measurements required by ss. 316.2951-316.2954. A witness otherwise qualified to testify shall be competent to give testimony regarding the percentage of light transmission when the testimony is derived from the use of an approved device. The reading from an approved device is presumed accurate and shall be admissible into evidence in the trial of any infraction arising under ss. 316.2951-316.2954.

History.--s. 1, ch. 84-296; s. 24, ch. 94-306.

Back to topic

Nice day's work :ppdance