Jump to content

Customers make me so mad sometimes

Guest FIREMAN68

By Guest FIREMAN68
in Window Tinting - General Discussion

Recommended Posts

Guest FIREMAN68

Guest FIREMAN68

Posted
Posted

Got a call the other day from a customer and he said that his back window is messed up and wants me to look at it. Well today I took a look at it and couldn't find anything. As we all seen it before the customer is trying to find the spot he was talking about. After a minute of looking he finds what he was talking about and shows me about a 1/2inch peace of hair on the BOTTOM center of the window. I told him what it was and that its not going to cause him problems later and he still asked me if I would fix it for him. He said his wife didn't like it and told him to get HIS car fixed. I already tinted about three cars for him and his family and had no problems with him before but this will be the last time I do a tint job for him. Well only cuz I have a good reputation I'm going to redo it for him Thursday but I'm not happy about it. I know everybody feels my pain :angel

Link to comment
Share on other sites
  • Replies 22
  • Created
  • Last Reply
Guest willie

Guest willie

Posted
Posted
cut it along the bottom defroster line, and steam off the bottom section, and replace only the bottom section where the hair is :angel:dunno

good idea dude :angel

I hate to be the bearer of bad news fireman, but it wouldnt have left my shop with that hair in it in the first place. You can dig those things out when there still wet. Just chalk it up as a learning experience and keep pluggin

Link to comment
Share on other sites
Guest TINTING AZ

Guest TINTING AZ

Posted
Posted

HOW LONG HAVE U BEEN TINTING IF YOU KNOW HOW TO DO WHAT HAROLD SAID (TINTMAN237) DO IT BUT IF YOU DONT JUST STRIP N RETINT IT BUT MO THE LAWN BEFORE U INSTALL. DEFINE MOW THE LAWN TAKE YOUR HEAT GUN TO THE BACK DASHBOARD OR FIBERS N JUST GIVE IT A WUICK PASS IT SOMETIMES HELPS :angel

Link to comment
Share on other sites
Guest FIREMAN68

Guest FIREMAN68

Posted
Posted
good idea dude :angel

I hate to be the bearer of bad news fireman, but it wouldnt have left my shop with that hair in it in the first place. You can dig those things out when there still wet. Just chalk it up as a learning experience and keep pluggin

I hear ya brother I'm the same way but I totally missed it when I did my final check. You can barely see it due to the hair being so dang thin and small. O well it should be a quick fix no problems.

Link to comment
Share on other sites
Guest willie

Guest willie

Posted
Posted
I hear ya brother I'm the same way but I totally missed it when I did my final check. You can barely see it due to the hair being so dang thin and small. O well it should be a quick fix no problems.

Yeah I remember TTC and MR P braggin about you. I wasnt trying to be an azz.

Keep pluggin and dont let it get you down :angel

HOW LONG HAVE U BEEN TINTING IF YOU KNOW HOW TO DO WHAT HAROLD SAID (TINTMAN237) DO IT BUT IF YOU DONT JUST STRIP N RETINT IT BUT MO THE LAWN BEFORE U INSTALL. DEFINE MOW THE LAWN TAKE YOUR HEAT GUN TO THE BACK DASHBOARD OR FIBERS N JUST GIVE IT A WUICK PASS IT SOMETIMES HELPS :dunno

Is there a reason your yelling at all of us :angel

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    martinmetalwork.com

    rxactlite.com

    rewiredtech.io

    tintwiz

    tinttek

    auto-precut.com

    filmvinyldesigns

    The Tint Tutor

    ride wrap

    signwarehouse

    Lexen

  • Activity Stream

    1. 4,189

      What did you tint today?

      Haven’t quit yet. But these really make me wanna
      no ma'am in Window Tinting - General Discussion
    2. 0

      Window Tinting Looking for an experienced Installer. Also needs a car or truck to car

    3. 0

      Austin, TX - Experienced Window Tinters - Full Time- $1000 Signing Bonus - W2 - Year Round Work - Willing to Relocate

      Company Background: Auto Tinting Austin LLC is a 5-Star rated Window Tinting business established in 2013. We offer high quality products, expert installation and excellent customer service. We Offer: -A Very Positive and Supportive Work Atmosphere -Consistent Work Year Round -Very Competitive Pay -Air Conditioned Bay -Tool Allotment -Snacks and Lunches -$1000 Sign On Bonus -Willing to Assist in Relocating the Right Candidate -Porter and Tint Shop Support Team -Plotter, Bottles, Shampoo Etc All Provided Job Duties: Seeking experienced window tinting technician to install automotive window film. Experience with plotter and hand cutting. Ability to operate manual vehicles for parking and moving. Will work with a helper team that can step in to cut film, move cars, remove film. Positive atmosphere. Hours: Schedule is open Monday-Saturday. Pay: $1000 Sign on Bonus! $1000-$2500+/Week Full Time, $300-600/Day Part Time ---BASE PAY AND TIPS!! Please call to schedule interview. 512-956-8468 Manager: Jody/Aric Auto Tinting Austin LLC 1601 Bench Mark Dr. Ste C Austin, TX 78728 www.AutoTintingAustin.com Job Type: Full-time Job Type: Part-time Pay: $1500-$2500+/Week Full Time, $300-600/Day Part Time
      AutoTintingAustinLLC in Classifieds • Employment • Marketplace
    4. 4

      Dual Low E Question

      To clarify for any public folks reading and industry folks that may not know: The LowE dual coating spoke of by the OP is a rare bird for use in area south of Iowa,USA. The only reason(s) I believe Cardinal (based in Wisconsin) placed the second coating on surface 4 is, 1) is to sell that type glazing system in areas that experience extreme cold below to above 0 F for nights on end and on 4 it is more effective at retention for that use. Iowa is logically the furthest south it should be recommended for. That said, the other coating on surface 2 is the hi-performance coating. This high performance coating is capable of rejecting solar energy, in a LowE2 glazing system of 60%+/- and up to 94% when considering Low4. A LowE4 dual pane would be the ticket in Australia's seriously hot spots. Sadly, if it caught on there, it would impact the window film industry in regions it is useful. Although, LowE4 is pricey at this point in time. A friend of mine had a sun room built on his house in Southern Virginia using LowE4, even as a roof. The vast majority of dual coating LowE glazing involves no coating on surface 4, the exception being original LowE that has not been readily available since around year 2000. Surface 2 & 3 is considered the norm today, for warmer climates north of tropical. Also, the hi-performance LowE2, 3 & 4 glazing systems are very effective at UV reduction (to my understanding in the mid to upper 90's). Original LowE first came on the scene in my early years in the industry and many of us didn't know unless the owner told us, and even with that knowledge, we did not know film covering the coating on surface 4 would rendered LowE ineffective. Those days, single pane LowE existed and the coating would be on surface 2, then.
      Tintguy1980 in Window Tinting - General Discussion
    5. 4

      Dual Low E Question

      Where I live in Western Australia, we generally focus more on solar energy rejection than heat retention. In recent years builders have jumped onto the low E and double-glazing bandwagon, telling their clients that they will have an energy efficient window, therefore saving them money on energy bills. What they don't tell them is that they will still be wanting to get their glass tinted once they realise how useless these types of windows are in our climate. I won't touch double glazed windows due to risks involved but with low E glass I tell the customer that we can only use a light scouring sponge on the surface to clean before installation, not our usual razor blades. They're usually cool with that. And if they're not, I'm not too bothered about missing out on their job.
      doctor4766 in Window Tinting - General Discussion
    6. 9

      Any XPEL Dealers?

      Thats good there’s not too many other shops offering it. I think a lot of customers choose a tint company based off reviews.
      pbalentine in Window Tinting - General Discussion
    7. 9

      Any XPEL Dealers?

      We are the only XPEL window tint dealer in our city. There is another dealer, but it does not offer window tint and has no plans to add it. The XPEL tint shop that was previously here moved to FL in 2022. So we came in at the right time, and no more will be added. It is about the same distance now as it was with Llumar. Our Llumar rep even tried to get us to allow closer shops multiple times, one that was only 3 miles away. Standing out is no problem, plus we are the highest-reviewed XPEL dealer in my state.
      DynamicATL in Window Tinting - General Discussion
    8. 2

      Am I being too picky or should I go back?

      Thanks! Very informative. I texted the installer yesterday about the issues, but no response, Google says he is open though. I drove by since his shop was on the way home, and his bay was closed. I'm going to give him the benefit of the doubt since it is long weekend and maybe on vacation, so he's not dealing with work. Going to text him again Tuesday.
      siphu in Window Tinting - General Discussion
    9. 9

      Any XPEL Dealers?

      Global does shrink good and handles heat well while shrinking.
      pbalentine in Window Tinting - General Discussion
    10. 9

      Any XPEL Dealers?

      I guess it's whatever you get used to. The GHP shrinks like butter for me. The ceramics are a little stiff.
      Dano in Window Tinting - General Discussion
×
×
  • Create New...