back glass

[Guest goldtooth]

tint job on porche came out sweet,only complaint from the customer was the dots around the back glass ,what can you do?

[TINTZEUS]

maybe let the film dry out...then go back and run your finger around the edge's.

[ssmobiletint]

Yeah, I've done that before. I've told a customer, thats just how it is and they roll. Sometimes they come back for some audio work and by then it has dried and I'll take a towell rapped around a hard card or mac tac, and go over them real quick while its there and the film lays down fine. I don't tell the customer that because I don't want every dick and tom comming back to have this done....

[Guest goldtooth]

maybe let the film dry out...then go back and run your finger around the edge's.

I normally would, but this guy is one of those 4|\|4L custys,the dots on the bottom of the window is at least 1 inch thick ,any way told him to let it dry and come back in a week, told him that for like an hour dude would not leave pain in the ass

[blackout66]

It's not too bad, just heat it and nail it with your sideswiper. Done deal. I'm glad it's just the bottom though.

[Guest Crackz]

heat and push

[Guest Keepitreel]

I get it all the time, but not as much on the small dots that go all the way around the rear glass.I tell them thats the way it come out and not much you can do about and if they see a car that is perfect all the way around with the dots please ask the owner where they had it done.New issue now is the Nissan Altima, Maxima and the 2dr Bmw I glue them but its not always perfect.I can't wait for them to do away with those pian in the ass dots. Some customers are 4|\|4L about it but I have yet to have one come back and say they saw a perfect glass with matrix dot.

[Guest goldtooth]

I get it all the time, but not as much on the small dots that go all the way around the rear glass.I tell them thats the way it come out and not much you can do about and if they see a car that is perfect all the way around with the dots please ask the owner where they had it done.New issue now is the Nissan Altima, Maxima and the 2dr Bmw I glue them but its not always perfect.I can't wait for them to do away with those pian in the ass dots. Some customers are 4|\|4L about it but I have yet to have one come back and say they saw a perfect glass with matrix dot.

you said it bro I'm still waiting ..for them to do away with those dots

[Protint]

Awhile back there was a tip on here about the small dots around the edge.

You squeege out all the water to the edge, leaving water just around the dots. The person said that this softens up the glue. After about 5-10 minutes you can push out the rest of the water and the dots should stick.

I have used this method on quarters and it works about 80% of the time.

[Guest allprotinter]

Those dots are a pain! Explain to the customer what happens when you tint raised dots. Then you covered your *$$. Not much you can do, expect get lucky. Try heat, or let the car sit in the sun, if it not a waiter.