2006 mercedes ml advice

[Guest tintec]

got 1 coming on tuesday,any tips ive being reading here that the back glass explodes easy when you heat it,im worrying now,any advice guys?

[Guest losdawg]

Just take your time. If the back window is laminated I would avoid putting too much heat on it. If my memory severs me right that back window is not laminated tho.

[Guest goldtooth]

Just take your time. If the back window is laminated I would avoid putting too much heat on it. If my memory severs me right that back window is not laminated tho.

take your time,I dry shrink them,never had a problem..not sure if the back glass is lam,but you really dont need excessive heat ..

[Guest DukeofTint]

the ml is not a hard tint the back window takes the most time.

[Guest tintec]

thanks guys,ill shrink it slow on a low heat setting,my main worry was them merc defroster lines can be pretty thick so when the peanuts start popping up it takes a lot of heat to get em out

[Guest naughtydog]

wire wool the backglass with 0000 wire wool.

Dont heat the %&$# out of the matrix like diamond tints did...just tell the customer there may be a little silvering on the matrix and save yourself some ££££

[Guest tintec]

I dont mind the matrix silvering,ill try the steelwool does it really help prevent them pop ups?

[Guest naughtydog]

If you shrink it correctly it will be fine...the wire wool just removes the laquer layer from the heater line, it works for me.

I find soap shrinking to be the best.

what type of film are you using?

[Guest tintec]

I soap shrink also and I use johnsons greystone but on limo I use rayguard johnsons as theres no limo in greystone,thanks mate ill give the wool a go,a quick once over or do you really have to scrub it?

[Guest Crackz]

I never had a problem shrinking on that glass