Guest darkdan Posted November 18, 2007 Report Posted November 18, 2007 http://www.masterwarehouse.com/?gclid=CJm2...CFQGRPAodxQHZ-w Anything that cheap can't work well. Any feed back? Do they break instantly? Not cut? Implode?
Guest haroldshouseoftint Posted November 18, 2007 Report Posted November 18, 2007 well, you already know this, but you get what you pay for This one might not be too bad http://www.masterwarehouse.com/?gclid=CJm2...CFQGRPAodxQHZ-w OK that's the same link you have, it won't take you directly to the page with the plotter on it. This one : Promotion ------ 54in Vinyl cutter plotter with FlexiSign 8.5.
blade Posted November 18, 2007 Report Posted November 18, 2007 that's the one I was gonna suggest checking out too. but I still know nothing about those particular plotters. I have a 40" and anything smaller than it I would consider a waste of time. there have been several times that I've needed a larger one.
Guest darkdan Posted November 18, 2007 Report Posted November 18, 2007 Even that 54" which is the most expensive by far is still.....cheap....BY FAR! Makes me scared.
Guest gtotint Posted November 18, 2007 Report Posted November 18, 2007 These are good ones for the money. http://www.signwarehouse.com/specials/Q100_packages.html or a good Graphtec wood work. I have two Graphtec's , one is 10 years old still works like new.
toodark Posted November 18, 2007 Report Posted November 18, 2007 SAVE YOUR MONEY!!!!!!!!!!!!!!!! I have a XY540, it is not worth the money.
tint_detective Posted November 19, 2007 Report Posted November 19, 2007 These are good ones for the money. http://www.signwarehouse.com/specials/Q100_packages.html or a good Graphtec wood work. I have two Graphtec's , one is 10 years old still works like new. IMO, if you are going to make the investment, get a Graphtec...... In the longrun, you will be happy you went ahead and spent the extra mula....
Guest SSC Posted November 19, 2007 Report Posted November 19, 2007 I've heard they're incredibly noisy, but function as intended. here's a youtube vid of one. BTW, I've had a 48" Graphtec (the CE3000-120) for four years. use it every day for several hours. total workhorse. I've replaced the teflon trip twice (wear item). had to call graphtec once, they were very helpful and the problem was very minor, I had dust in one of the optical sensors.
pierce8468 Posted November 19, 2007 Report Posted November 19, 2007 Dan please read my post about good cheap plotter.
Guest Crackz Posted November 19, 2007 Report Posted November 19, 2007 I was told that the us cutter plotters are very good and they offer them at good prices on ebay
.png)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.