Jump to content

CL500 mercedes

Guest Key West

By Guest Key West
in Mercedes

 Share

Recommended Posts

Guest Key West

Guest Key West

Posted
Posted

Anyone done a CL500 Mercedes? Had a BIOTCH of a time getting the front windows behind the rubber. This particular model has laminated glass on all windows, so I couldn't use a torch to heat the bottoms. Now the passenger side is peeling. and for the price, I aint willing to pull the panels, real liability issues. :coffee any help would be appreciated. :chick Ever notice how your friend who wants the "brother in law" deal NEVER has an easy car? Sucks :cry

Link to comment
Share on other sites
the art of tint

the art of tint

Posted
Posted

You should heat shrink the film on the outside of the glass, there are only a few fingers. Did you trigger the door pin switch so that the window is in the upright position? You also must leave the doors open for a couple of hours after tinting to dry, so that when the window drops it wont peel. Also be careful of spraying too much water, you can easily burn out the seat switch.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
  •   Sponsored by
    tintwiz

    tinttek

    auto-precut.com

    filmvinyldesigns

    The Tint Tutor

    ride wrap

    signwarehouse

    Lexen

    martinmetalwork.com

    rxactlite.com

    rewiredtech.io

  • Activity Stream

    1. 4

      Tint installers, please help! Is this damage from the installer?

      What vehicle is it? Surely heat damage would be apparent immediately after seeing the car, I mean that looks like it would be obvious and not exactly hideable? Can we get a picture from a little further back?
      doctor4766 in Window Tinting - General Discussion
    2. 0

       Sun Pro Glass Tinting is NOW HIRING experienced Installs

      Sun Pro Glass Tinting is looking for experienced installs in the Houston Area for *Residential & Commercial window tinting *Security film *Wet Glaze attachment system *Decal & logo installs Please send your resume or contact information to info@sunproglasstinting.com or call 281-242-0222
      SunProGlass in Classifieds • Employment • Marketplace
    3. 4

      Tint installers, please help! Is this damage from the installer?

      Was that a new car?
      Dano in Window Tinting - General Discussion
    4. 1

      2025 kia sorento pass front window will not roll down after we tinted it. Anyone else?

      Maybe it got wet? I would check all the wire connectors on that door.
      pbalentine in Window Tinting - General Discussion
    5. 4

      Tint installers, please help! Is this damage from the installer?

      Looks like the side was heated up to fix imperfections. You really only want to heat 2-3 seconds at time, not 30 seconds like above.
      pbalentine in Window Tinting - General Discussion
    6. 4

      Tint installers, please help! Is this damage from the installer?

      If that is a piece of plastic, it really looks like heat gun damage.
      Bham in Window Tinting - General Discussion
    7. 4

      Tint installers, please help! Is this damage from the installer?

      Hello professional tint installers and everyone else, I need your upmost help in solving this problem. I just got my brand new car tinted and after a few days I noticed this on my driver side door panel. Is this damage caused by the tint installer? Heat damage? I had ceramic tint installed. I should’ve done a better job looking at every little detail on my car after the work but I was preoccupied. What could this be? Please help! The cars only 2 weeks old.
      oneshot in Window Tinting - General Discussion
    8. 1

      2025 kia sorento pass front window will not roll down after we tinted it. Anyone else?

      2025 kia sorento pass front window will not roll down after we tinted it. Anyone else have this problem. switch clicks but no movement
      swanny in Window Tinting - General Discussion
    9. 0

      Join Our Family-Run Window Tinting Business in Mobile, Alabama!

      Are you a skilled window tinter looking for a new opportunity? Do you want to work in a fast-paced, fun environment where you’re treated like family? Look no further! About Us: We are a small, family-run business with 24 years of experience in the window tinting industry. We believe in second chances and go above and beyond to support our employees. We’re looking for a dedicated individual to join our team and grow with us. What We Offer: Health Insurance: We care about your well-being. Relocation Assistance: Willing to help the right candidate move to Mobile. Competitive Pay: 30% commission with the potential to make six figures! Career Growth: Opportunity to learn detailing and ceramic coating, with potential for management in the future. What We’re Looking For: Experience: At least 2 years of window tinting experience. Knowledge: General understanding of detailing and ceramic coating (training provided). Work Ethic: Hard worker who shows up on time and enjoys a fast-paced environment. Attitude: Willingness to learn and take instruction well. Why Join Us? Family Atmosphere: We treat our employees like family. Supportive Environment: We believe in second chances and helping our team succeed. Fun Workplace: Enjoy a lively and engaging work environment. If you’re ready to take your career to the next level and become part of our family, we’d love to hear from you! Apply today and let’s tint the Mobile together!
      Matt scott in Classifieds • Employment • Marketplace
    10. 1

      Newbie

      You may want to consider hiring a professional for a few reasons. 1. Difficulty of Installation Professional window tinting is a skilled task that requires precision and experience: Large windows are particularly challenging to tint without bubbles or wrinkles and contamination. Professionals have specialized tools and techniques to ensure smooth application. DIY attempts often result in noticeable imperfections: Bubbles, creases, and dust particles trapped under the film Uneven edges or gaps around the window frame Inconsistent tint darkness across multiple windows etc 2. Risk of Thermal Fracture Incorrect film selection or application can lead to serious problems: Different glass types require specific tint films to avoid thermal stress Professionals can assess your windows and recommend appropriate films They understand the relationship between glass thickness, size, and tint darkness 3. Warranty Considerations Professional installation often comes with guarantees: Many manufacturers void warranties for DIY installations Professional installers typically offer their own workmanship warranty 4. Time and Cost Efficiency While DIY might seem cheaper initially: Professionals work faster and more efficiently Mistakes in DIY installation can be costly to fix The value of a professional's time and expertise often outweighs potential DIY savings 5. Proper Tools and Materials Professionals have access to: High-grade films not available to the general public Specialized tools for precise cutting and application Cleaning solutions that ensure proper adhesion It may sound like a good idea to save a few bucks and "do it yourself", but you are not going to be happy with the results, you risk breaking the glass from thermal fracture if the wrong film is used and or if there is partial shading on the window and it'd going to look like hell.
      TintDude in Window Tinting - General Discussion
×
×
  • Create New...