Fiat
19 topics in this forum
-
- 6 replies
- 1.5k views
Seals attached to the door panels so I removed, not sure if you can lip over or not but I'm not a fan of that so. Three screws and two hex heads and the panel pulls off. Front quarter only on it, they're bordered and glass if you're wondering. The door opener handle has a cover you'll need to remove and pops straight off.
Last reply by Debo5454, -
- 0 replies
- 279 views
Got one coming in later anything to be aware of?
Last reply by Debo5454, -
- 4 replies
- 1.6k views
I am looking to tint the two back plastic windows on my 2015 Fiat 500L. Any suggestions would be appreciated.
Last reply by jh812, -
new fiat 500 1 2 3
by jttint1- 22 replies
- 8.4k views
been doin a few of these little guys
Last reply by Lock, -
I tinted a 2014 Fiat 500 L. The back 1/4 windows are plastic. Ive never came across a plastic side window before. Becareful I scratch the window a little while cutting it out. Ill try and post a picture later
Last reply by Devil with bad attitude, -
- 1 reply
- 1k views
Has anyone applied film to a panoramic sunroof on this car? Suggestions?
Last reply by spectrum, -
- 3 replies
- 839 views
So on the roll ups the seal is pretty low. Did you guys remove the panels?
Last reply by tintcartel, -
- 0 replies
- 928 views
Had a Punto in for a redo today. Removing the film was the most painful experience of my life. Actually a really nice car to work on, shrink and fitting is very easy, no sever curves. One thing to watch out for is the rear side windows have a large dot matrix at the bottom and the film definitely doesn't like to sit on it. Youl want to remove the boot card for access, there's one screw in the hand hold and then it just needs a good few prises with a cloth and screwdriver at each side. All In all a pleasant car to do.
Last reply by BBS Tinting, -
- 0 replies
- 913 views
What's up my fellow euro tinters! Sooo has anyone done one of these? I heard the front triangle window pops out but guessing it still has a metal from around it? I will end up doing 1 a month so I would like to be able to do these, any tips?
Last reply by xstudiox, -
Fiat bravo or brava?
by Guest Brian- 2 replies
- 980 views
Any problems with these models? Thanks, Brian Flexx car detailing Amsterdam, the netherlands
-
Fiat brava or bravo
by Guest Brian- 0 replies
- 882 views
Any problems with this Fiat models? Thanks Brian Flexx car detailing Amsterdam
-
- 6 replies
- 3.4k views
probably the only one in the US right now.good friend of mine had to buy it under his Aunts name in italy,had to purchase an airline ticket as if she was commin to the US then buy transporter plates.NOW he has to make it US standard,but at least its here.
Last reply by jttint1, -
- 8 replies
- 2.8k views
Any 1 had one of these in before and had a problem getting the hinge from glass. No torx screws. Any hints???? Like the one in link below http://www.autoweb.co.uk/dealer_sites/car_...1_249299748.jpg Thanks
-
2003 Punto 1 2
by Guest BlackOut- 10 replies
- 9.1k views
Just done Punto Care required on front rolldowns-tight on vertical edge Told customer I had to leave a 1mm gap so that tint did not snag. She accepted this and was delighted with job.
-
Punto <1999
by Guest Fragger- 2 replies
- 4.1k views
I just wondered if it was possible to remove the rear window catch on the rear windows in order to make it easier to tint the windows. I can remove the whole glass section with the catch but then cant seem to find a way to remove it. Does anyone have any ideas ? If not tips for appling tint around this obstical.
-
Fiat Bravo
by Guest da_stripperboy- 3 replies
- 4.1k views
Need help on tinting a bravo rear window. this is the most curved window ive tried and ive wasted alot of tint trying to do it. im using dartztints. is it possible to shrink these without creases. lol
-
98Reg Yellow Punto Sporting
by Guest grainger- 5 replies
- 5.3k views
hi, new to this site! iv got a yellow punto sporting and am curious if anyone kno's what window tint looks good? like what percentage? because I dont want my windows being illegal! if anyones got some pics are anythink that wud b great! Thanks alot!
-
Need help please
by Guest Lyle Beach- 0 replies
- 3.5k views
I am looking for a web board that would cover the 1968 Fiat 850 Spyder. Or if anyone knows of a place that sells used Fiat engines. Thanks!
-
Bumber and Exhaust
by Guest DrPepper- 1 reply
- 3.7k views
I have a 97 Fiat Punto SX 75, the exhaust is behind the bumber. I wanna get a back box. What do I need to do, hang the back box down, or get a new bumber with one of those whole things in it? is it called a rear defuser? Help please! Nick.
Last reply by Protint,
-
Sponsored by
.png)
-
Activity Stream
-
-
-
1
2025 Camry UVU coating on all the glass??
You have to look at the watermark on the bottom corner of the glass. It will have a large UV marking on it if it had the coating. If it does not have the coating it will have the normal watermark that is on all the other vehicles. I have tinted multiple Toyota Crown's and just not used a blade anywhere for cleaning. If you are installing decent film that will last 10 years or better then you shouldn't be worried about failure. If it does fail by then it more than likely will not be an issue for the shop that installed it.- 1
-
-
1
2025 Camry UVU coating on all the glass??
Hey guys! We have the new 2025 Toyota Camry that has just hit. My question is does anyone know if the UVU coating is on all of the glass? If so, how are we supposed to tint these cars? It seems to me that if we tint over the coating, and in the future, the window tint fails and needs to be removed, then what happens when we try to remove the film? Especially on the rear window. Let me know your thoughts. -
0
Fulltime Auto Tinter Needed in San Antonio, TX
Premier Window Tinting 3M Pro Shop and Prestige Dealer in San Antonio, TX is hiring an experienced window film and PPF installer. We can keep you busy year around with both auto and flat glass work. Must have auto tinting experience. Flat glass experience preferred and be willing to work on both auto and flat glass jobs. Must have PPF and Ceramic Coating experience Must have experience working w/ a plotter and/ or the ability to hand cut Full time Commision and benefits Drug free and subject to background checks for some flat glass jobs. Please send resume to susan@premierwindowtinting.com -
16
What’s the best bang for buck film
Depends on your climate, the cheapest quality films can last 10 years in the right climate. There have been a few posts on here from dealers having some failures after a few years. On Reddit, a guy had a bubbled-up rear window of Pinnacle after 3.5 years. They had some defective master rolls in 2017 causing the films to be much lighter than normal. I haven't seen any issues with IRX or AIR, just ATC and CTX. I don't know if the current ATC is the original but CTX (gen 2) has been out for over a decade, same for Pinnacle. If you're using ATR, it is more bulletproof like many HP films.- 2
-
-
16
What’s the best bang for buck film
Fair call, but I don't remember the last time I had a warranty with Llumar film -
16
What’s the best bang for buck film
Just FYI, Llumar does the same...6 bubbled up ATC/CTX windows and 1 delaminated CTX windshield all denied due to being below legal.- 2
-
-
16
What’s the best bang for buck film
Their films have always been good to me. Over the last 40 years I've used several brands but Llumar and Suntek have been some of the best. I remember I shop I was contracting for in the early days of my own business were using Sunguard and they were getting catastrophic failures after only 18 months in some instances. Bubbled rears and distortion on side glass. When they tried to claim warranty on some 20% films that were advertised as Lifetime warranty, they were told that because 20% VLT wasn't legal (At the time) in Australia, there was NO WARRANTY CLAIMABLE- 1
-
-
0
35 year experienced tinter looking for work and willing to relocate
35 years experience Auto residential commercial know a little bit about some vynal and clear braws but I know all glass in every form on every vehicle some better than most but all of it I can do in the middle of a sandstorm blind folded with both hands tied behind my back and still get 150 percent I'm a hard worker...I'm not perfect but I'm an honest hard worker with a vehicle willing to relocate with a little help I do ask for 40 percent commission on every ticket regardless of entry level film or ceramic I can and will sell 75 percent of your work......100 pecerent on all removals that I do you need a good tinter I got your back but you gotta have mine too my names Dave let me know with a text if you need some help let's talk 409-525-9973-409-525-9973- 409-525-9973
-
(1).thumb.jpg.a5816490e755b603d01183fc373b22ee.jpg)
