Bentley
21 topics in this forum
-
Water on Amps and electrics?
by Guest TintsOvOz- 1 reply
- 2.8k views
Just picked up an Aston and Bentley dealer, thats the reason for the questions. is there any electrics under the rear deck we need to watch out for, incase water travels near them? Oz............
-
- 0 replies
- 1.3k views
.had to do a RnR on this on in the sun
Last reply by evananthonybaez, -
- 12 replies
- 2.9k views
Customer wants 2005 GT coupe windshield done, Ive done one before in a dark ceramic film, but it was a show car....I would imagine it would be OK as long as it's done in ceramic film, but I thought Id ask the pros....lemme know what you guys think!
-
Dropped some Film on this Monster Today (Bentley)
by Guest TheDarkSideMemphis- 7 replies
- 1.8k views
I have no Idea why my pictures are upside down??? It wasn't as bad as I thought it would be. I spent the most time trying to figure out how to get the rear headrests out...
Last reply by blackout66, -
Anyone done one?
by Guest ninjatinter- 2 replies
- 4.5k views
Hey gang. I have got a customer with a 2001 Arnage. I have no Idea if its got Lami glass, antenas, and that kind of stuff. So If any of you have done one, I would love to hear about it. Thanks, Ninja P.S. Already put in a request with Artoftint
-
- 11 replies
- 3.6k views
Am i right in thinking rear small window quarters are roll downs ? if so any tips ? rear screen access looks tight, any heads up appreciated from installers that have worked on this model, also am i right in thinking this is the one with a ton of electrics in the boot below back glass ? am 50 / 50 on taking this car on, feedback appreciated, anything i cant afford makes me a little nervous & i sure cant afford one of these,
-
Last reply by yz101, -
- 19 replies
- 6k views
Anyone tinted one? Just looking at one, the lil windows look fun.
Last reply by The ///Man, -
NEED HELP!! TINTING THE 07 CONT, GT COUPE
by Guest DAVETHETINTMAN- 1 reply
- 3.4k views
HELLO everybody, I own ELITE Glass Tinting in pa , unfortunatly for this the area we don't see these cars that often. this will be the first for my store ever.. I have been reading all the do's and dont's for this car , but can't find any usefull tricks how to tech on the quarter glass.. trim panel removal ect.. I am however very aware of all the cars electronic's and such , but would really like to get some info on to properly do the quarter glass as I would like to tint from edge to edge .. so basicaly like to know what others are doing with these cars .. thanks for any help
-
automatic window drop sensor
by Guest John Castelli- 3 replies
- 2.3k views
any one have any trouble with getting these wet
Last reply by VIP tint + glass, -
05 bently my first one
by Guest John Castelli- 7 replies
- 2.3k views
what should I be aware of with sides n the back glass ? any tips ???
-
- 3 replies
- 2.2k views
This car is so hard to tint. It was a convertible and everything is fine til you have to tuck the bottom of the film in between the door panel and the glass. The seals are so freeking pushed agasint the glass that is so hard to just slide the fim in. Definately let the water dry out of the window because is possible for the seals and the soft top to pinch it when it gets closed. I had to do clear bra as well, it was a nightmare. This car just sucks loll. Took 6 hrs to do clear bra. Oh well. It sucks when you have Lambo and Ferrari as dealerships and you have to do all their stuff since those cars are always kind of hard to tint. If anyone needs any pointers feel free to P…
-
- 25 replies
- 8.7k views
Here is some video made yesterday. In case You will find some mistakes at work don't at my tinterdude - he tint, like he can. So part 1, 2
Last reply by skanlan, -
- 4 replies
- 3.3k views
Just did an 09 Brookland.I love that car if I cna just save all the money from my next 2500 jobs I can get one. Car was easy to do but has rear brake light at bottom of window so tint cant block it in Nj so had to cut out an area looked ok but would havw been better solid. Will post pics soon.
Last reply by JayZ, -
this was my first bently
by Guest goldtooth- 3 replies
- 3.4k views
did it in a storage parking. they had hundreds of thousands of dollars worth of cars there
-
- 27 replies
- 8.4k views
Check out this Bad Boy! 35%. I think the car is fro Danny DeVito
-
My First Bentley and hopefully not the LAST.
by Guest Keepitreel- 7 replies
- 5.3k views
I finally land one and up here is MA they are alot of them around and they all keep it in the family so I hope to see more in the upcoming months.We used suntek Carbon 70 on this one.Sweet Car, Oh did I mention I had to go pick it up from the customer , It runs smoooooth.
Last reply by Texastintchick, -
Bentley SUV 1 2
by LEO'n'DARTZ- 12 replies
- 6.1k views
As I know all such kind of cars are sold firstly in America. Did anybody heard if this car is on sale now? Leo is an idiot, this is EU forum M.I.B. move it to right place!!!
Last reply by alltracpete, -
Continental GT or Flying Spur = Phaeton...
by Guest PanEuropean- 0 replies
- 4.7k views
http://www.tintdude.com/bentley-continental.html
-
- 4 replies
- 4.9k views
Last reply by LEO'n'DARTZ, -
new BENTLEY
by Guest autotinter- 0 replies
- 5.8k views
http://www.tintdude.com/bentley-arnage.html
-
Sponsored by
.png)
-
Activity Stream
-
-
-
1
2025 Camry UVU coating on all the glass??
You have to look at the watermark on the bottom corner of the glass. It will have a large UV marking on it if it had the coating. If it does not have the coating it will have the normal watermark that is on all the other vehicles. I have tinted multiple Toyota Crown's and just not used a blade anywhere for cleaning. If you are installing decent film that will last 10 years or better then you shouldn't be worried about failure. If it does fail by then it more than likely will not be an issue for the shop that installed it.- 1
-
-
1
2025 Camry UVU coating on all the glass??
Hey guys! We have the new 2025 Toyota Camry that has just hit. My question is does anyone know if the UVU coating is on all of the glass? If so, how are we supposed to tint these cars? It seems to me that if we tint over the coating, and in the future, the window tint fails and needs to be removed, then what happens when we try to remove the film? Especially on the rear window. Let me know your thoughts. -
0
Fulltime Auto Tinter Needed in San Antonio, TX
Premier Window Tinting 3M Pro Shop and Prestige Dealer in San Antonio, TX is hiring an experienced window film and PPF installer. We can keep you busy year around with both auto and flat glass work. Must have auto tinting experience. Flat glass experience preferred and be willing to work on both auto and flat glass jobs. Must have PPF and Ceramic Coating experience Must have experience working w/ a plotter and/ or the ability to hand cut Full time Commision and benefits Drug free and subject to background checks for some flat glass jobs. Please send resume to susan@premierwindowtinting.com -
16
What’s the best bang for buck film
Depends on your climate, the cheapest quality films can last 10 years in the right climate. There have been a few posts on here from dealers having some failures after a few years. On Reddit, a guy had a bubbled-up rear window of Pinnacle after 3.5 years. They had some defective master rolls in 2017 causing the films to be much lighter than normal. I haven't seen any issues with IRX or AIR, just ATC and CTX. I don't know if the current ATC is the original but CTX (gen 2) has been out for over a decade, same for Pinnacle. If you're using ATR, it is more bulletproof like many HP films.- 2
-
-
16
What’s the best bang for buck film
Fair call, but I don't remember the last time I had a warranty with Llumar film -
16
What’s the best bang for buck film
Just FYI, Llumar does the same...6 bubbled up ATC/CTX windows and 1 delaminated CTX windshield all denied due to being below legal.- 2
-
-
16
What’s the best bang for buck film
Their films have always been good to me. Over the last 40 years I've used several brands but Llumar and Suntek have been some of the best. I remember I shop I was contracting for in the early days of my own business were using Sunguard and they were getting catastrophic failures after only 18 months in some instances. Bubbled rears and distortion on side glass. When they tried to claim warranty on some 20% films that were advertised as Lifetime warranty, they were told that because 20% VLT wasn't legal (At the time) in Australia, there was NO WARRANTY CLAIMABLE- 1
-
-
0
35 year experienced tinter looking for work and willing to relocate
35 years experience Auto residential commercial know a little bit about some vynal and clear braws but I know all glass in every form on every vehicle some better than most but all of it I can do in the middle of a sandstorm blind folded with both hands tied behind my back and still get 150 percent I'm a hard worker...I'm not perfect but I'm an honest hard worker with a vehicle willing to relocate with a little help I do ask for 40 percent commission on every ticket regardless of entry level film or ceramic I can and will sell 75 percent of your work......100 pecerent on all removals that I do you need a good tinter I got your back but you gotta have mine too my names Dave let me know with a text if you need some help let's talk 409-525-9973-409-525-9973- 409-525-9973
-
(1).thumb.jpg.a5816490e755b603d01183fc373b22ee.jpg)
